LED DIGITAL DISPLAY

Components needed:

1. Led display : 16*64

Front view.   

Back view.

2.microcontroller: bx5ul

                     

Microcontroller

3.Data bus cable

    

Circuit connection to be given :

Software required : Led tvshow2014 (onbon) - http://www.onbonbx.com/en/down/class/?1.html

Procedure:

1. Click setup, click screen parameters and enter the password "888" and click OK.

2.Parameter setting dialogue box will appear where screen width and height should be changed as per required. Here the screen width is 64 and height is 16.Now click save and close the settings.

3.Zoom in the display for better view of the display .

4.Right click program and add subtitle zone 

5. Now a subtitle zone will appear where you can change the value of x,y (ONLY IF YOU WANT THE DISPLAY TO SHOW TWO DIALOGUES AT ONCE ie one at top and another at bottom.

6.now click subtitle icon which is right of the subtitle name.

7.Type the message as per required and save them( automatically save if not saved manually) 

8. Click preview to view the message 

9. Change the display method as per your requirement (usually continiously move left ) and run speed to 10 for decent experience.

10. Click the brightness icon below the language tab and change it as per requirements ( 13 for optimal viewing )

11. Connect pen drive on your PC or laptop and format it .

12. Click the USB icon to save the configuration to the U disk

13. Click save and remove the pendrive when saved successfully.